|
 Materials
Handling
Cranes,
Chains & Slings
Indoor
Cranes: Safe Lifting Operations (MHS-035)
This video program is specifically designed for non-licensed operators to
give them the knowledge they need to safely operate several types of cranes.
Topics include: pre-operation safety inspection; rigging techniques; lifting
and moving. Includes Employee Handbooks. (19 min., 1991, English)
CTT
Crane
Safety Awareness for Site Superintendents (MHS-036)
This 8 minute video discusses some of the hazards and risks involved in
crane operations. It identifies information managers should be familiar with
if cranes are operating on their site. This short video is provided by
OSHA's Office of Construction Engineering. (8 min., 1992, English)
OSHA
Cranes,
Chains, Slings and Hoists (MHS-037)
Comply with 1910.180. Covers practices for inspection, maintenance and safe
use of lifting devices. Includes: daily pre-use inspections and proper use
of equipment; physics of sling angles and safe load capacities; don't twist
chains, swing and raise loads over body. (12 min., 1999, English)
LIP
Cranes,
Chains, Slings and Hoists Safety (MHS-038)
Designed for anyone operating jib hoists or cranes, this video explains
sling angles, safety techniques, inspection procedures, and much more.
Anyone operating this equipment MUST be trained, and this program meets OSHA
training requirements. (12 min., 1990, English)
DBP
Overhead
Cranes (MHS-039)
Overhead cranes, like all equipment, can inflict serious injuries when
misused or abused. Poor operation, failure to perform preventive
maintenance, and failure to inspect can lead to serious accidents. Safety is
the responsibility of everyone involved in crane operations, from operators
to maintenance personnel. You can help ensure safe operation of overhead
cranes by knowing and following all safe work practices and safety
regulations that are applicable to your workplace. Key Training Points:
inspection programs; safety regulations; training; load limits and balance;
safety guard types; preventative maintenance programs. (7 min., 1997,
English) SFTS
The
Big Reach (Crane Safety) (MHS-040)
This short video provides a basic overview of safety rules applicable to any
crane use. It discusses crane fatalities, daily inspection, using common
sense, and setting up a crane for work. (5 min., 1990, English)
SFTS
Forklifts
& Powered Lift Trucks
Battery
Charging Safety (MHS-002)
Each manufacturer of batteries has their own rules for charging batteries.
This video provides general instructions for mixing solutions safely,
avoiding situations causing sparking or arcing and matching voltage and
ampere battery to charger. (10 min., 1997, English)
DBP
OSHA
Regulations for Forklifts 1910.978 (MHS‑027)
Discusses overhead guards, fuel, batteries, lighting, dock boards, bridge
plates and operators training while driving on platforms. Also includes
pre-inspection and maintenance. (18 min., 1995, English)
DBP
Powered
High Lift Trucks: Order Picker Safety (MHS‑018)
If you have order-pickers in your warehouse, this video is for you. This
video teaches employees how to properly operate an Order Picker Lift Truck.
It discusses proper driving techniques and the need for personal fall arrest
equipment, as well as other safety issues for those working with and around
powered high-lift trucks. (15 min., 1999, English)
CTT
Powered
Low Lift Trucks: Walkie & Walkie/Rider Safety (MHS-021)
When OSHA issued its revised rule (1910.178), powered low-lift trucks were
included in the new training requirements. This video goes over training for
operators of trucks commonly called walkies and walkie/riders. They are
transporters, pallet trucks and platform trucks. Addresses: Characteristics;
Load handling; Pedestrian traffic; PPE (Includes employee handbooks.) (16
min., 1999, English) CTT
Coaching
the Lift Truck Operator (MHS-026K) 1
Utilizing the highly acclaimed "Coaching" method of non-lecture
teaching, this information-packed classroom course encourages participants
to observe, analyze and discuss recommended safety practices. Based on
requests from safety directors, the course also includes a video
presentation for in-plant personnel who do not drive lift trucks, but do
work in areas where lift trucks are operated. This interactive course
includes a fully-scripted manual and two videos. Manual includes overhead
transparencies and discussion cues so that workshop leaders can actively
involve course participants in the conversation about safe operation of lift
trucks. Includes information on: pre-start inspection; design
considerations; picking up the load; moving the truck; setting down the
load; guidelines for hands-on training; pedestrian safety. (1999, English)
FLI
Forklift
Instructor Training (MHS-001)
An excellent video describing the engineering principles of the forklift. It
includes the Lever (fulcrum) principle, which provides information on the
load center, 3-point suspension center and other important features for
carrying loads. Three short programs in one video: engineering principles,
OSHA operating rules, and equipment maintenance. Designed so instructors can
concentrate on each subject. (22 min., 1996, English)
DBP
Spanish: Forklift
Instructor Training - A New Approach (MHS‑020S)
Forklift
Case Histories: Serious Business (MHS‑004)
Perhaps nothing emphasizes the significance of this new video program better
than the beginning of the program itself: "This training program
presents re-enactments of four actual accidents which occurred on or around
forklifts and walkies. Your life may depend on learning from the mistakes of
these victims." Ideal for training and re-training. Includes: securing
the platform; securing the load; safe forklift speed and turning; handling a
forklift; working safely around forklifts and pallet trucks. (16 min., 2000,
English) CTT
Spanish: Casos de
la Vida Real con los Montacargas (MHS‑016S)
Forklift
Mechanical Safety and Hazardous Materials (MHS-007)
Forklift mechanics are exposed to a variety of hazardous materials in their
job. This program makes them aware of the hazards and how to avoid
exposures. (17 min., 1990, English) DBP
Forklift
Operation & Safety (MHS-008)
Teach employees how to properly operate and maintain forklifts. Video
discusses proper driving techniques and maintenance/safety checklists. (17
min., 1988, English) JJK
Forklift
Safety (MHS-010)
One of industry's most useful tools is the forklift, but it is potentially
one of the most dangerous. This video provides a checklist to ensure
forklift safety. It discusses inspection, fork adjustment, transporting
workers, and rest position. (5 min., 1989, English)
SFTS
You're
the One (MHS-015)
A humorous video describing the basic operation of the forklift. It includes
proper driving techniques, maintenance and safety checks. (21 min.,
1996, English) DBP
Driving
in Dangerous Situations (MHS-017)
Provides correct methods for driving forklifts in various conditions such as
slippery floors, congestion, and uneven terrain, on loading docks, ramps and
trailers. (14 min., 1997, English) CTT
Forklift
Handling: Safety
in Dangerous Situations (MHS-019)
Sometimes operators must handle forklifts in dangerous situations. This
crucial video program will help operators avoid accidents by reviewing
special techniques for special situations. Addresses: slippery surfaces;
heavy traffic areas; loading docks; inside trailers/ramps. Includes employee
handbooks. (15 min., 1999, English) CTT
Working
Around Forklifts: A Pro-Active Approach (MHS-022)
Always behave as if an accident might happen... this is the key to working
safely around forklifts. This video program helps motivate employees to take
this lesson to heart and explains how and why special precautions are
necessary. Addresses: inherent hazards in forklifts; special things to watch
for when turning; mechanics; visibility; warning devices; parking. (16 min.,
1995, English) CTT
Construction
Forklifts: Extending Your Reach (MHS‑031K) 1
According to OSHA, 85 people die and 100,000 are injured every year due to
unsafe forklift operations — 100,000! These accidents could be prevented
with safe operating procedures and proper training. This training resource
will help you comply with OSHA’s Final Powered Industrial Truck Standard
(1910.178). The package includes the video, Construction Forklifts:
Extending Your Reach, employee handbooks, forklift inspection checklists,
and forklift training certificate master. Topics include: lifting
principles; start-up walk around inspections; moving a load; safe work
practices. (14 min., 1999, English) CTT
Man
Baskets in Construction (MHS-042)q
An excellent training video concerning lift safety. It includes the pre-lift
meeting, the inspection of the lift, crane, and personal platform, the lift
trial and safe work practices. (10 min., 1997, English)
CTT
On
the Go: Forklift Safety (MHS‑041)
The rough-terrain forklift needs special considerations while in operation.
This video explains the basic principles of operation and inspection. (12
min., 1995, English) AGCA
Handtrucks,
Dollies & Pallet Jacks
Safe
Use of Hand Trucks, Dollies and Pallet Jacks (MHS-028K) 1
This program is designed to increase efficiency and reduce losses from
work-related injuries. It also teaches workers not to guess about the
correct procedures, and demonstrates proven methods that have been
recommended by experts in the industrial safety field.
Includes an instructor guide and study guide. (23 min., 1992,
English) MEDR
Electric
Pallet Jack (MHS‑043) q
This program explains the proper procedures for operating and maintaining
electric pallet jacks. (12 min., English)
ASTI
Forklift
Training Programs
Forklift
Safety: An Operator Training Program (MHS‑024K) 1
This video-based program features a unique perspective only a seasoned
operator could provide... because it was written by one! In addition to
covering the new forklift training regulation, this program also covers the
nuts and bolts of forklift safety, helping you prevent damage to people,
products, and equipment. The program focuses on three critical areas: the
truck itself, surrounding hazards, and general safety rules. Employees will
get information about everything from pre-operational inspections to the
center-of-gravity triangle, to proper steering, handing, and refueling
techniques. Forklift Fundamentals: Get The Facts – Topics include: powered
industrial trucks; controls and instrumentation; power plant inspections;
equipment inspection. Forklift Operations: Carry The Load – Topics
include: operating conditions; special hazards; vehicle and pedestrian
traffic; proper load manipulation. (21 min., 1999, English)
JJK
Spanish: Forklift
Safety: An Operator Training Program (MHS‑025KS)
Forklift
Safety (Compliance Package) (MHS-032K) 1
In an effort to decrease the staggering number of injuries and fatalities,
OSHA finalized the new Powered Industrial Truck Standard (1910.178). This
Forklift Compliance Package can help you to comply with the latest training
requirements. The compliance package includes two video programs, employee
handbooks that correspond to each video program and a Compliance Guide.
Forklift Fundamentals: Get The Facts – Topics include: powered industrial
trucks; controls and instrumentation; power plant inspections; equipment
inspection. Forklift Operations: Carry The Load – Topics include:
operating conditions; special hazards; vehicle and pedestrian traffic;
proper load manipulation. (35 min., 1999, English)
CTT
Spanish: MHS‑033S
and MHS‑034S
Operaciones
con el Montecargas: Conozca Los Hechos (Forklift Safety: Get the Facts)
(MHS-033S)
Topics include: powered industrial trucks; controls and instrumentation;
power plant inspections; equipment inspection. (22 min., 1998, Spanish)
CTT
Operaciones
con el Montecargas: Llevando el Peso (Forklift Safety: Carry the Load)
(MHS-034S)
Topics include: operating conditions; special hazards; vehicle and
pedestrian traffic; proper load manipulation. (20 min., 1998, Spanish)
CTT
NEW!! ASTI Forklift Training Program 1
q
Forklift
Training 1: Training and Basic Principles (MHS‑044)
Tape 1 of 4: This portion of the training program addresses: learning about
the lift truck to be operated; knowing your work environment; understanding
the loads you are required to handle; and knowing how to operate safely. (10
min., 2002, English) ASTI
Forklift
Training 2: Operation (MHS-045)
Tape 2 of 4: This segment of the training program addresses safe operation
of forklifts, including basic safety features and accident prevention rules.
(10 min., 2002, English) ASTI
Forklift
Training 3: Loading (MHS-046)
Tape 3 of 4: This tape covers important topics of loading, including:
understanding your truck's capacity; safe load handling; taking a load off
the rack; depositing a load. (9 min., 2002, English) ASTI
Forklift
Training 4: Pre‑Operation Inspection and Refueling/Recharging
(MHS-047)
Tape 4 of 4: The final session addresses issues important to safe forklift
operation beyond the operation aspects, including: pre-operation
inspections; refueling; recharging. (13 min., 2002, English) ASTI
|
